- 6 -
DC-DC TRANSDUCER CONFIGURATION
Equipped with DC-DC Personality Board
Designated by Model Number 1003-S-010x
The Trans-Tek Series 240
DC-DC LVDT, Series 350
Gaging, or 600 Angular
Displacement Transducers
can be connected as
illustrated in Figure DC-1.
In this configuration, the
transducer is p15
VDC. For higher
sensitivity in the Series
240 LVDTS, the input
terminal J1-1 can be
substituted for J1-3,
increasing the excitation v30 VDC.
Modification to the jumper position on the DC
Board may be required. Please see next page for
jumper position instructions.
Other DC powered
transducers, such as a
Trans-Tek Model 0605
Angular Displacement
Transducer, require a dual
bipolar power supply.
For transducers requiring
this excitation, use the
configuration shown in
Figure DC-2.
Figure DC-1
Figure DC-2
Summary of Contents for 1003
Page 1: ...M009 0009 Rev 8 MODEL 1003 TRANSDUCER INDICATOR INSTRUCTION MANUAL ...
Page 13: ... 13 Table 3 Table 4 Figure 3 RS232C Option Switch Settings and Pin Designations ...
Page 15: ... 15 S1 S2 S3 S4 SWITCH DEFINITIONS Front Panel View ...
Page 23: ... 23 Table 6 Troubleshooting Guide Table 7 Replacement Mating Connector P Ns ...