![background image](http://html.mh-extra.com/html/trans-tek/1003/1003_instruction-manual_1150603022.webp)
- 22 -
BASE UNIT SPECIFICATIONS
Environmental
Operating Temp. Range:
+31°F to +131°F (0°C to +55°C)
Storage Temp. Range:
-40°F to +185°F (-40°C to +85°C)
Splash Proof Front Panel
Anodized Aluminum Case
Mechanical
Case Size:
1.72”H (43.7mm), 3.56”W (90.4mm), 5.0”L (127mm)
Front Panel:
1.91”H (48.5mm), 3.8”W (96.5mm), .1”THK (2.54mm)
Panel Cut Out:
1.77”H (45mm), 3.62”W (91.9mm), up to .25”THK (6.35mm)
Display:
5 Digit, .4”H (10.2mm) LED, polarity sign for Negative only
Rear Panel Connectors:
type Riacon 310091 Series
Front Panel Membrane Switches
Input Power
Input Voltage:
115 Vrms ±10% at 50/60 Hz
Input Current:
approx. .05 ampere
Display
Resolution:
1 Part in 20000
Accuracy:
±.01% Reading ±LSD
Conversion Rate:
2 Readings/Second (500 msec/update)
Accuracy Stability:
±.1% Reading ±1 LSD for 120 Days (at +77°F, +25°C)
Zero Stability:
within ±2 Digits for 120 Days (at +77°F, +25°C)
Fixed Functions
Tare (Zero):
automatic push button Zero
Cal (Calibrate):
automatic push button Cal (value programmable by user)
Lock Out Switch:
accessible through rear panel (locks out front panel membrane switches)
Hi/Lo Reading Recall:
push button recall at front panel
Set Points:
two programmable Hi set points with programmable hysteresis
two programmable Lo set points with programmable hysteresis
front panel status lamp for each set point
Personality Board
In addition to the specifications given for the Base Unit above, additional specs apply to this meter,
depending on the installed Personality Board. Unless otherwise noted, the total specification is the
sum of the specs for the Base Unit plus installed Personality Board
Summary of Contents for 1003
Page 1: ...M009 0009 Rev 8 MODEL 1003 TRANSDUCER INDICATOR INSTRUCTION MANUAL ...
Page 13: ... 13 Table 3 Table 4 Figure 3 RS232C Option Switch Settings and Pin Designations ...
Page 15: ... 15 S1 S2 S3 S4 SWITCH DEFINITIONS Front Panel View ...
Page 23: ... 23 Table 6 Troubleshooting Guide Table 7 Replacement Mating Connector P Ns ...