Routine Operation
34
RMWH-SVX001C-EN
In the Event Log, events are color coded by type:
•
Red = Caution, Warning, Alarm
•
Yellow = Fault, Unsuccessful Calibration
•
Green = Successful Calibration
Select any event on the
All
tab to see a pop-up with the
event details.
Alarms
The
Alarms
tab shows a list of alarm events for the device.
Non-latching alarm events that resolved without being
acknowledged are indicated by a number in parentheses
after the
Alarms
tab heading.
A single alarm event is divided into two events in the event
log: one for the initiation of the alarm and another for the
conclusion of the alarm.
The last 100 events show in chronological order. When
there are 100 events in the list and a new event occurs, the
oldest event is deleted to make space for the new event to
show.
Use the scroll bar to move through the list of events.
Select any event on the
Alarms
tab to see a pop-up with
event details.
Faults
The
Faults
tab shows a list of all fault events for the device.
The last 100 events show in chronological order. When
there are 100 events in the list and a new event occurs, the
oldest event is deleted to make space for the new event to
show.
Use the scroll bar to move through the list of events.
Select any event on the
Faults
tab to see a pop-up with
event details. The detailed view shows the board location,
if applicable, and the software error code.
Calibration
The
Calibration
tab shows a list of calibration attempts
for the device.
Summary of Contents for TruSense RMWH
Page 45: ...Diagnostics RMWH SVX001C EN 45 To see details about an error select it ...
Page 66: ......
Page 67: ......
