Söllnerstr. 9 92637 Weiden
+49 (0)961 48 23 0 0
S7-USB user manual
43 / 85
2019/10/05 05:07
7.3 Bus configuration
To Parametrize the connection to the device, select a device and click “Parametrize”.
Regarding to the device you maybe have to click on the button Bus configuration (see
table).
Here you can Parametrize the following:
Use bus config for PC
Tooks the bus configuration from the PC
Baud rate
chooses the Baudrate for the cable to bus communication
Highest station address
The highest station-address in the bus
(the less you use, the more performance on the MPI-bus,
must be corresponding with the configuration in the CPU’s)
PD/PC is the only master on
the bus
The TS-Adapter is the one and only master in the MPI-bus
(adapter hast to speak to all passive clients)
Profile
Bustype of the connection
Local client address
Which local station-address is used for the TS-Adapter.
Please consider that a programming device has normally the number 0,
operator panel have 1, CPU’s use 2, FM/CP’s 3 etc.
Please: Never use the same station-number for 2 different stations!
Protocol type
Protocol type of the connection
Boot settings
Boot setting of the connection
7.4 Network settings
Here you can set the network configuration of the selected device:
