IMAQ ™ is a trademark of National Instruments Corporation. Product and company names mentioned herein are trademarks or trade names of their
respective companies.
3
7
1868
A
-01
©
Copyright 1998, 1999 National Instruments Corp. All rights reserved.
March 1999
INSTALLATION GUIDE
IMAQ D100 C
AMERA
C
ABLE
This guide describes how to attach the IMAQ D100 family of digital
camera cables to your image acquisition (IMAQ) device.
You can use the IMAQ D100 cable to connect your IMAQ device to your
digital video camera and four trigger channels. Refer to your IMAQ device
documentation for more detailed information on these signals.
Note
Your camera receptacles or cables may appear different from those illustrated in this
guide. Refer to the National Instruments Web site,
http://www.natinst.com/imaq
,
for the latest information on using different cameras and cables with your IMAQ device.
What You Need to Get Started
To install your IMAQ D100 cable, you will need the following:
❑
IMAQ D100 cable
❑
IMAQ D100 Camera Cable Installation Guide
❑
Your IMAQ device and documentation
❑
Your computer
❑
Your digital camera
❑
IMAQ D2504 cable and documentation (optional)
❑
BNC cables for trigger signal connection (optional)
❑
Trigger signal source (optional)
