Traeger S7-USB, User Manual

Page: 23 / 85

Söllnerstr. 9 92637 Weiden info@traeger.de +49 (0)961 48 23 0 0
S7-USB user manual 23 / 85 2019/10/05 05:07
21. Set the “Profile“ to “DP“ (“decentralized Peripherals “).
22. Save your settings by clicking the “OK“button and close the opened “Set PG/PC - interface“dialog
6.2.2.5 TCP/IP RFC1006 setting
23. For this kind of communication you only have to install the corresponding software.
6.2.2.6 ProTool/Pro RunTime (RT) Configuration
24. If you want to use ProTool/Pro RunTime you can set the “PG/PC Interface” by selecting the entry
“DPSONLINE”. Therefore you have to select “Access Point of Application” and configure it as described
above. The easiest way is to use the S7-LAN/MPI-LAN/MPI-USB- driver which supports USB and LAN
products.
The interface configuration for these programs is finished.
Continue with the software which you want to use:
⇒
SIMATIC Step© 7 Manager (v5.2 + SP1)
⇒ Windows Control Center (WinCC) (v6.0)
⇒ Windows Control Center flexible 2004 (WinCC flexible) (v5.2.0.0)
⇒ ProTool/Pro (v6.0 + SP2)
⇒ Microwin 3.2
6.2.3 SIMATIC Step© 7 Manager (v5.2 + SP1)
Configure the interface as described in Set PD/PC-Interface .