User Manual
TRAQC-8
TRAQC-8 04/2017 EN Rev.4
page : 6
1.2
TRAQC-8 Description
The Tradinco Pneumatic Pressure Calibrator, TRAQC-8 is
a universal pressure calibrator, ranging from 0 to 250
bar.
The TRAQC-8 has been designed for the testing and
calibration of low and high pressure pneumatic
measurement equipment:
regulators, pressure gauges, pressure converters,
pressure switches, recorders, etc.
Because of the built-in rechargeable battery and high
pressure gas bottles it is possible to use this test unit at
location, independent of any external mains power
supply and/or pressure source.
The TRAQC-8 consists of 6 main parts.
•
A high quality digital pressure display with curser and two function push buttons.
•
One or more pressure sensors plus related pneumatic circuit.
•
An electrical measuring circuit (standard mA + V DC)
•
One high quality digital calibrator
•
One pneumatic regulating system
•
Two high pressure gas bottles
With the TRAQC-8 it is possible to measure test pressures generated by the built-in gas bottles
as well with test pressures which are generated by an external pressure source.
The aluminum case of the TRAQC-8 is provided with a lid which has a handle for carrying the
calibrator.
The test and filling hoses are stored in a case in the lid of the carrying case.
Dimensions are (LxWxH) 405x295x255 mm and the weight is approximately 17 kg.
1.2.1
CE Pressure Equipment Directive 2014/68/EU
The TRAQC-8 meets the safety regulations as mentioned in appendix 1 of the European
guideline 2014/68/EU.
The TRAQC-8 is a combination of different pressure component as mentioned in article 1
paragraph 2.1.5
The maximum volume of the biggest pressure bearing housing is 1 liter with a maximum
pressure of 200 bar.
TRAQC-8 classified to be used with gas group 2
Following table two the TRAQC-8 are manufactured in accordance with article 3 paragraph 3
"sound engineering practice" and CE marking based on the PED does not apply.
1.2.2
CE EMC Directive 2014/30/EU
The electrical part of the TRAQC-8 meets the regulations as mentioned standards
•
EN-IEC 61000-4-2
: 2009
•
EN-IEC 61000-4-3
: 2009
•
EN-IEC 61000-4-4
: 2012
•
EN-IEC 61000-4-5
: 2009
•
EN-IEC 61000-3-2
: 2014
•
EN-IEC 61000-3-3
: 2013
The unit is CE marked accordingly.
