User Manual
TRAQC-8
TRAQC-8 04/2017 EN Rev.4
page : 29
3.7
Using the Memory Mode
The memory option enables setting calibration procedures a personal computer and then transfer
these calibrations settings to the calibrator. When a calibration is done in the field the results are
stored into the memory, and can be retrieved from the calibrator and stored in the computer. All
memory transfer functions to and from the TRAQC-8
, require “AutoCal” software progra
m to be
installed on the PC.
Depending upon the results of the calibration the user can decide if he wants to adjust the
instrument under test and then do a new calibration or leave it as is. If during the calibration the
user wants to stop it is possible to abort the procedure without storing the results.
3.8
Memory Functions
To access the memory functions select the ‘memory functions’ option in the ‘main menu’ with the
‘ARROW’ keys and press ‘ENTER’ (F1)
key.
3.8.1
List by tag number
When instruments’ data is st
ored in the TRAQC-8 memory, select the instrument to be calibrated
in the ‘list by tagnr.’ option. The menu shows the different instruments in a list. Use the ‘ARROW’
keys to select the right instrument and press ‘ENTER’ to confirm.
3.8.2
List by serialnumber
To select an instrument by its serial number, select the ‘list by serialnr.’ option in the ‘memory
functions’ menu.
3.8.3
View definitions
If you want to look into the definition of an instrument but do not want to do a calibration select
the 'vie
w definitions' option in the ‘memory functions’ menu. Use the ‘ARROW’ keys to scroll
through the different instruments.
