TRADEDOR TD77DM, Installation Manual

Page: 17 / 44

Tradedor TD77DM & TD77SEL Installation Guide
Direction Of Rotation
(SAFETY EDGE)
1 Press and hold the bottom closed button on the receiver board (fig.7.5) . This is located at the bottom
right corner of the yellow transformer and the barrel should start turning in the downwards direction.
Should the barrel be turning in the upward direction, swap motor wires black to U and brown to V.
2 Press and hold the bottom closed button on the receiver board until barrel stops moving.
fig.7.5
fig.7.4
8 Before plugging in, check to make sure that
there are no bare cables touching and all wires
are securely fixed.
9 There is a four dipswitch block at the bottom
middle of the receiver board (usually blue or red).
Slide dipswitch 2 into the up position
(fig.7.5) .
16
9. Installing Receiver Box
(SAFETY EDGE) - (CONTINUED)
- TYPE 1