TRADEDOR TD77DM, Installation Manual

Page: 34 / 44

Tradedor TD77DM & TD77SEL Installation Guide
Hard Wired Rocker / Key Switch
(HOLD TO RUN)
WIRING AS FOLLOWS:
Receiver Box Green 6 Block Terminal (fig.12.3) :
U – Up wire from switch
D – Down wire from switch
G – Common wire for the supply to the switch
Receiver Box Green 4 Block Terminal (fig.12.1) :
– Up wire from switch
– Down wire from switch
– Common wire for the supply to the switc2
Key Switch (fig. 12.4) :
Right Block 13 – Up wire
Left Block 14 – Down wire
Right Block 14 – Common wire for the supply to the switch
Left Block 13 – Right Block 14 Link wire between terminals
To open key switch remove screw then turn key
a quarter turn.
Rocker Switch (fig.12.2) :
4 – Up wire
3 – Down wire
5 – Common wire for the supply to the switch
5 – 2 Insert Link wire between terminals
To open rocker switch remove screws.
fig.12.3
fig.12.1
33
fig.12.2
5
2
3 6
1 4
FIT LINK
SIDE
OPEN
CLOSE
COMMON
(LIVE)
15. Optional Extras