TPM EasyPAC, User Manual, Page: 50 / 223

TPM
EasyPAC User Manual
50
below:
Figure 5-41: group up axes
When the “Set Axis Groups” option is clicked, a dialog will pop up as the following figure.
Figure 5-42: set group dialog
The “None” option of the left and right side means the axes have not joined groups. Select the non-grouped
axes with one of Group1~7 specified and press the arrow button “>>>” or “<<<” to make the selected axes
grouped up as a group. The grouped axes will show up in the device monitor as following:
Figure 5-43: grouped axes
In this example, M121 is a grouped axis under AxisGroup1 instead an independent axis.

Save And Recover Configurations
The reading and writing of configuration profile are almost the same as AI/O in the previous section
except one more place to save the configuration profile – pc.