TPM EasyPAC, User Manual, Page: 44 / 223

TPM
EasyPAC User Manual
44
Figure 5-34: save configuration dialog
There are two targets of configuration storage – PAC and EEPROM
1. PAC
This option is saving the configuration as an AI.kwcfg file and then transferring to PAC for KW
use. It is not necessary to select devices from device list if the PAC checkbox is checked. Press the
“Save” button will finish the saving.
Note that the each AI IP address is supposed to be within 48 to 63. It will not be in the list if the IP
address is out of range.
2. EEPROM
Users need to take few steps to save the configuration in the EEPROM as following.
1. Check the EEPROM option, and all the modules with EEPROM will show up in the list.
2. Select modules need to store to EEPROM by checking the checkbox.
3. Press “Save” button.
The status window displays the saving result with time stamps and messages.