TPM EasyPAC, User Manual, Page: 38 / 223

TPM
EasyPAC User Manual
38
Figure 5-19: functions under tools option

Windows
When multiple slave modules are displayed in the same time, the related menu will be re-arranged
accordingly.
Figure 5-20: functions under window option

Help
This shows the MyLink revision number.
5.2.2. Module Status
After clicking the initial button, the found and identified slave modules will be shown accordingly
.
Click the
check box in front of the slave module and the corresponding menu will pop-up. Except USB-L131, it will
show up two Motionnet masters at the top left corner – Ring_0 and Ring_1. If the master is EasyPAC,
MyLink could save the profile according to data type designated for KW. Moreover, the slave modules
besides axes control are supposed to connect to Ring_0 and axes control is supposed to connected to Ring_1.
Check the slave device at the check box will pop up the corresponding control window at the main frame of
MyLink and the properties will show at the left bottom corner.
Figure 5-21: slave devices found by the Motionnet master

Properties
The related item will be shown according to the selected slave module type. If the property is grayed out
means it is read only.