TPM EasyPAC, User Manual, Page: 47 / 223

TPM
EasyPAC User Manual
47
1. Cycle Time
It is the time period between two sampling times. The default value is 2ms and maximum at
200ms.
2. Mode
5 modes are available: Counter, Frequency, Period, GT and GC.
Mode name Parameter Description
Counter
– Counter mode
Time
0: up-count
1: down-count
Average Unused
Edge Trigger type: Rise/Fall
Upper Limit
0 to 4,294,967,295
Maximum number for up-count and initial number for down-count.
Lower Limit
0 to 4,294,967,295.
Initial number for up-count and minimum number for down-count.
AlarmOut
Measured Value < Lower Limit or
Measured value > Upper Limit
Frequency
– Frequency mode
Time
0.1s/1s/10s/100s the sampling period.
1s: INx gets 1000 pulses within 1 second, the measured frequency
is 1KHz.
Average unused
Edge Trigger Type: Rise/Fall
Upper Limit Hz (0 ~ 4,294,967,295)
Lower Limit Hz (0 ~ 4,294,967,295)
AlarmOut
Measured Value < Lower Limit or
Measured value > Upper Limit
Period
–
Period measurement mode, this is used to measure the ON-OFF
time of the incoming pulses, the max measured time is 800ms.
Time
2ms/20m/200ms/800ms
Set the max measure time for INx input pulse.
Example: The period of INx input pulse is 1.5ms. The most
accurate measure value can be obtained by 2ms. If the input pulse
period ranges from 1.5ms to 500ms, please use 800ms to measure
the period.
Average
Calculate the value with different number for average. “2” means
the period is averaged with 2 samples.
Edge Trigger type: Rise/Fall
Upper Limit ms (0 ~ 4,294,967,295)