TPM EasyPAC User Manual Download Page 35

Page: 35 / 223

TPM

EasyPAC User Manual

5.1.2.4 AES Code

Figure 5-13: dialog window for generating AES key

Secure ID: display the hardware id of the EasyPAC. Moreover, the system integrator could input the

hardware id of other EasyPAC in the “Secure ID” text box to generate the corresponding AES key.

EasyPAC provides an AES key encryption mechanism to protect our customers. The SI key is supposed to

be 16 numeric digits. If the SI key is not 16 digits or it contains non-numeric digits, an error message will

show up as figure below.

Figure 5-14: insufficient digits

5.1.2.5 Modbus Parameter

The “Modbus Parameters” page let users edit Modbus related parameters for KW applications of EasyPAC.

Modbus requires settings of slave ID, TCP and RTU parameters. MyConfig provides sets of default settings

in advance. Users can change the settings and press the “Save Settings” button to transmit the settings to

EasyPAC.

Next time when users login to MyConfig, the settings set last time or the default values will be shown in the

Modbus parameters page. Users can always login to check in this page. This page is shown in the following

figure.

Summary of Contents for EasyPAC
































































































































































































































Search results

Summary of Contents for EasyPAC

Reviews:

TPM EasyPAC, User Manual, Page: 35 / 223

Search results

Summary of Contents for EasyPAC

Reviews: