TL-WR842N
300Mbps Multi-Function Wireless N Router User Guide
- 54 -
Peer Gateway
-
Enter the Peer gateway or domain.
Negotiation Mode
-
Here you could find two options, IKE Negotiation Mode and Manually
Mode. You are recommended to select the default mode-- IKE Negotiation Mode, and all the
parameters could be negotiated automatically according to IKE. If Manually Mode is selected,
you should manually set up the Encryption and SPI parameters according to the instructions.
Security Protocol
-
Select the Security Protocol from the drop-down list. Here you could find
AH (Authentication Header) and ESP (Encapsulation Security Payload) protocols.
Authentication Algorithm
-
Select the Authentication Algorithm for IPsec connection. You
could also keep the default value "Auto".
Encryption Algorithm
-
Select the Encryption Algorithm for IPsec connection. You could also
keep the default value "Auto".
In SPI
-
It is for direction in SPI parameter set in manual mode, and the parameter must be
the same as peer
Out SPI.
In Authentication Key
-
It is for direction in authentication key set in manual mode, and the
key must be the same as peer
Out Authentication Key.
Out SPI
-
It is for direction out SPI parameter set in manual mode, and the parameter must be
same as peer
In SPI.
Out Authentication Key
-
It is for direction out authentication key set in manual mode, and
the key must
be
same as peer
In Authentication Key.
PFS Group
-
Select the PFS property from the drop-down list that should be the same for the
local and remote endpoints. If you select "None" for local endpoint, any value is accepted for
remote endpoint.
Lifetime
-
Manually enter the number of seconds for the IPsec Lifetime. The default value is
28800.
Enable
- Enable or Disable current policy.
To modify or delete an existing entry:
1. Find the desired entry in the table.
2. Click
modify
or
delete
as desired on the
Configuration
column.
Click the
Delete All
button to delete all entries.
4.9.3
Security Alliance List
Choose “
VPN
→
Security Alliance List
”, you can view the information of the IPsec SA (Security
Alliance) in this table (shown in Figure 4-40).
