TL-WR842N
300Mbps Multi-Function Wireless N Router User Guide
- 24 -
Click the
Save
button to save your settings.
2.
If your ISP provides a static or fixed IP Address, Subnet Mask, Gateway and DNS setting,
select
Static IP
. The Static IP settings page will appear, shown in Figure 4-7.
Figure 4-7
WAN - Static IP
IP Address -
Enter the IP address in dotted-decimal notation provided by your ISP.
Subnet Mask -
Enter the subnet Mask in dotted-decimal notation provided by your ISP,
usually is 255.255.255.0.
Default Gateway -
(Optional) Enter the gateway IP address in dotted-decimal notation
provided by your ISP.
MTU Size -
The normal
MTU
(Maximum Transmission Unit) value for most Ethernet networks
is 1500 Bytes. It is not recommended that you change the default
MTU Size
unless required
by your ISP.
Primary/Secondary DNS -
Enter one or two DNS addresses in dotted-decimal notation
provided by your ISP.
Click the
Save
button to save your settings.
3.
If your ISP provides a PPPoE connection, select
PPPoE/Russia PPPoE
option. And you
should enter the following parameters (Figure 4-8):
