Ø
Manually connecting: The Router must be connected or
disconnected to Internet manually.
5.4.3 MAC Address Clone
This page is to configure the MAC address of the R410 Router's WAN
port.
Ø
MAC Address: The Router's MAC adddress of WAN port, which
don't need to be changed usually. However some ISPs may bind the
MAC address of your machine, then only the packets sent by this
MAC address will be passed. You can input the MAC address that
binded and click
Save
button. Then the WAN MAC address is
cloned.
Ø
Your PC's MAC address: The MAC address of the PC that is now
browsing this page.
Ø
Restore Factory MAC: Click this button to restore the MAC address
of the Router's WAN port to the factory default value.
Ø
Clone MAC Address: Click this button to copy the MAC address of
current managing PC to the blank after MAC Address. Only the PCs
on the LAN can use Clone MAC address function.
Note:
If you click the
Save
button, the R410 Router will reboot.
5.5 DHCP Server
There are three submenus under the
DHCP Server
menu:
DHCP Service
,
Client List
and
Static Address
. Click any of them, and you can configure
the corresponding function. The detailed explanations for every submenu
are provided below.
5.5.1 DHCP Service
The settings of TCP/IP include Host IP, Subnet Mask, Gateway, and DNS
configurations. It is not an easy job to configure many computers on your
LAN. Fortunately, DHCP provides a rather simple approach to handle all
these settings. If you enable the R410 Router's DHCP server, it will
T L- R 4 1 0
Multifunctional Broadband Router User's Guide
T L- R 4 1 0
Multifunctional Broadband Router User's Guide
