The page shows the R410 Router's network parameters assigned
dynamically by the DHCP server of your ISP, just like IP address, Subnet
Mask, Gateway, etc. Click the
Renew
button, and you can update these
parameters from the DHCP server. Click the
Rlease
button, and you can
release IP configurations to the DHCP server. You can also set DNS
server manually here.
A few ISP's DHCP server doesn't support broadcast application. If you
can't get the IP address normally, you can choose the
Get IP with
Unicast DHCP
option. (You needn't choose this option usually)
2
) If you choose
Static IP
, i.e. fixed IP address provide by ISP, the
page will be shown as follow.
Note:
If you have change the IP address of the LAN port, you must use
the new IP Address to login the R410 Router.
Ø
Subnet Mask: Subnet Mask of the Router's LAN port, usually is
255.255.255.0. The Subnet Mask of all PCs on the LAN must be set
to a same value.
Note:
If the new LAN IP address you set is not on a same subnet, the
Virtual Server and DMZ Host will not take effect, until it is re-
configured correctly.
5.4.2 WAN Port Configuration
First, please choose the type (PPPoE/Dynamic IP/Static IP) to connect to
the Internet. The default type is Dynamic IP.
The connection type you choose is dependent on the settings assigned
by your ISP. The connection type you need to choose may differ from ISP
as well as the service you applied for. If you are not sure which
connection type you use currently, please contact your ISP to obtain the
correct information.
1) If you choose
Dynamic IP
, i.e. automatically get IP address from
your ISP, you can see the page as follows.
T L- R 4 1 0
Multifunctional Broadband Router User's Guide
T L- R 4 1 0
Multifunctional Broadband Router User's Guide
