Chapter 5 Advanced Configuration
5.1 Login
After your successful login, the R410 Router's setup page will appear.
There are eight menus in the left menu bar:
Status, Wizard, Network,
DHCP Server, Forwarding Rules, Security, Static Routing
and
System
.
Click any one, and then you can configure the corresponding function.
You can click each page's "Help" button to get more detailed explanations
and instructions. To apply any setting you have altered on the page,
please click the "Save" button. To clear the values you've entered on the
page, click
Clear
button and re-enter values.
There are the detailed explanations for every function of the menus below.
5.2 Status
This page shows the R410 Router's current status. All information
provided is read-only.
Ø
IP Address: The Router's WAN IP address, namely the IP address
your ISP provides for you. Please consult your ISP if you have any
question.
Ø
Subnet Mask: The Router's WAN Subnet Mask provided by your
ISP, usually is 255.255.255.0.
Ø
Gateway: Optional, the IP address of the Gateway provided by ISP.
Please consult your ISP if you have any question.
Ø
DNS Server: Optional, the IP address of the DNS server provided
by your ISP. Consult your ISP if you have any question.
Ø
Secondary DNS Server: Optional, if ISP provides you two DNS
servers, input the IP address of another DNS server here.
After finishing all configurations of basic network parameters, please click
Finish
button to close the page.
T L- R 4 1 0
Multifunctional Broadband Router User's Guide
T L- R 4 1 0
Multifunctional Broadband Router User's Guide
