TP-Link SafeStream TL-ER6120 Page 31 User Manual Download

Page: 31 / 166

-25-



PPTP Status

Status:

Displays the status of PPTP connection.



“Disabled” indicates that the PPTP connection type is not

applied.



“Connecting” indicates that the router is obtaining the IP

parameters from your ISP.



“Connected” indicates that the router has successfully obtained

the IP parameters from your ISP.



“Disconnected” indicates that the connection has been manually

terminated or the request of the router has no response from

your ISP. Please ensure that your settings are correct and your

network is connected well. Consult your ISP if this problem

remains.

IP Address:

Displays the IP address assigned by your ISP.

Primary DNS:

Disp

P’s Primary DNS.

Secondary DNS:

Displays the IP address of your ISP’s Secondary DNS.

6) BigPond

If you

vice P

connection, please choose the B

lays the IP address of your IS

r ISP (Internet Ser

rovider) has provided the account information for the BigPond

igPond connection type.

Summary of Contents for SafeStream TL-ER6120







































































































































































Search results

Summary of Contents for SafeStream TL-ER6120

Reviews:

Related manuals for SafeStream TL-ER6120

Brands by name

Popular brands

TP-Link SafeStream TL-ER6120, User Manual

Search results

Summary of Contents for SafeStream TL-ER6120

Reviews:

Related manuals for SafeStream TL-ER6120

Brands by name

Popular brands