TP-Link SafeStream TL-ER6120 Page 122 User Manual Download

Page: 122 / 166

-116-

Rate Rx

：

Displays the rate for receiving data frames.

Displays the rate for transmitting data frames.

Packets Tx:

Displays the number of packets transmitted on the interface.

Displays the bytes of packets transmitted on the interface.

Displays the interface.

Displays the amount of IP Fragments received by WAN port.

3.7.4.2

IP Traffic Statistics

IP Traffic Statistics screen displays the detailed traffic information of each PC on LAN or DMZ.

Choose the menu

Maintenance

→

Statistics

→

IP Traffic Statistics

to load the following page.

Rate Tx:

Displays the number of packets received on the interface.

Packets Rx:

Displays the bytes of packets received on the interface.

Bytes Rx:

Bytes Tx:



Advanced WAN Information

Interface:

IP Fragment Rx:

Abnormal IP Packets Rx:

Displays the rate for transmitting data frames

Figure 3-86 IP Traffic Statistics

The following items are displayed on this screen:

Summary of Contents for SafeStream TL-ER6120







































































































































































Search results

Summary of Contents for SafeStream TL-ER6120

Reviews:

Related manuals for SafeStream TL-ER6120

Brands by name

Popular brands

TP-Link SafeStream TL-ER6120, User Manual

Search results

Summary of Contents for SafeStream TL-ER6120

Reviews:

Related manuals for SafeStream TL-ER6120

Brands by name

Popular brands