TP-Link SafeStream TL-ER6120 User Manual Download Page 125

Page: 125 / 166

-119-

On this page, you can detect the WAN port is online or not.

Choose the menu

Maintenance

→

Diagnostics

→

Online Detection

to load the following page.

3.7.5.2

Online Detection

Figur

ction

Act

hen Online Detection is

active, WAN status will depend on the result of both PING and DNS
Loo

, WAN status will be detected

according to physical connection status and dial-up status.

Mode:

Detect automatically or Manually. In Auto mode, gateway will be selected

NS Lookup manually.

Ping:

.0.0 means PING

DNS Lookup:

er in Manual mode. 0.0.0.0 means DNS

Displays the detected WAN port.

Detection:

Displays whether the Online Detection is enabled.

Display the detecting results.

time displayed while the router is running. On this page you can configure the system

time and the settings here will be used for other time-based functions like Access Rule, PPPoE and
Logs.

e 3-88 Online Dete

The following items are displayed on this screen:



General

Port:

Select the port to be detected.

Detecting:

ivate or inactivate Online Detection function. W

kup. When Online Detection is inactive

as destination for PING detection, DNS server of WAN port will be
selected as destination for DNS Lookup. In Manual Mode, you can
configure the destination for PING and D

Enter the destination IP for Ping in Manual mode. 0.0
detection is disabled.

Enter the IP address of DNS serv
Lookup is disabled.



List of WAN status

Port:

WAN Status

3.7.6

Time

3.7.6.1

Time

System Time is the

Summary of Contents for SafeStream TL-ER6120







































































































































































Search results

Summary of Contents for SafeStream TL-ER6120

Reviews:

Brands by name

Popular brands

TP-Link SafeStream TL-ER6120, User Manual

Search results

Summary of Contents for SafeStream TL-ER6120

Reviews:

Brands by name

Popular brands