Toyota Sienna 2004 Owner'S Manual Download Page 390

Page: 390 / 505

04 SIENNA_U (L/O 0408)

384

2004 SIENNA from Aug. ’04 Prod. (OM45422U)

Temperature A, B, C—

The tempera-

ture grades are A (the highest), B,

and C, representing the tire’s resis-

tance to the generation of heat and

its ability to dissipate heat when

tested under controlled conditions on

a specified indoor laboratory test

wheel. Sustained high temperature

can cause the material of the tire to

degenerate and reduce tire life, and

excessive temperature can lead to

sudden tire failure. The grade C cor-

responds to a level of performance

which all passenger car tires must

meet under the Federal Motor Vehicle

Safety Standard No.109. Grades B

and A represent higher levels of per-

formance on the laboratory test wheel

than the minimum required by law.
Warning: The temperature grades for

this tire are established for a tire that

is properly inflated and not over-

loaded. Excessive speed, underinfla-

tion, or excessive loading, either sep-

arately or in combination, can cause

heat buildup and possible tire failure.

Summary of Contents for Sienna 2004


























































































































































































































































































































































































































































































































Search results

Summary of Contents for Sienna 2004

Reviews:

Related manuals for Sienna 2004

Brands by name

Popular brands

Toyota Sienna 2004, Owner'S Manual

Search results

Summary of Contents for Sienna 2004

Reviews:

Related manuals for Sienna 2004

Brands by name

Popular brands