Toyota Sienna 2004 Owner'S Manual Download Page 315

Page: 315 / 505

04 SIENNA_U (L/O 0408)

309

2004 SIENNA from Aug. ’04 Prod. (OM45422U)

OPERATION FOR DEFOGGING

The inside of the windshield

For best results, set controls to:

Fan speed—

To the desired fan speed

Temperature—

Towards

high temperature

to heat; low temperature

to cool

Air flow—WINDSHIELD

Pressing the windshield air flow button
turns on the defogging function with the

purpose  of  clearing  the  front  view.
When  pressing  the  windshield  air  flow  but-
ton,  the  air  intake  selects  FRESH  auto-

matically. This is to clean up the front

view more quickly.
Press the “A/C” button for dehumidified

heating or cooling. This setting clears the
front view more quickly.

On humid days, do not blow cold air
on the windshield—the difference be-

tween the outside and inside tempera-

tures could make the fogging worse.

OPERATION FOR DEFROSTING

The outside of the windshield

For best results, set controls to:

Fan speed—

To the desired fan speed

Temperature—

Towards

high temperature

Air flow—WINDSHIELD

Pressing the windshield air flow button
turns on the defrosting function with the

purpose  of  clearing  the  front  view.
When  pressing  the  windshield  air  flow  but-
ton,  the  air  intake  selects  FRESH  auto-

matically. This is to clean up the front

view more quickly.
Press the “A/C” button for dehumidified

heating. This setting clears the front view
more quickly.

To heat the vehicle interior while de-
frosting

the

windshield,

choose

floor/windshield air flow.

If air flow control is not satisfactory, check

the side vents. The side vents may be
opened or closed as shown.

Side vents

Summary of Contents for Sienna 2004


























































































































































































































































































































































































































































































































Search results

Summary of Contents for Sienna 2004

Reviews:

Related manuals for Sienna 2004

Brands by name

Popular brands

Toyota Sienna 2004, Owner'S Manual

Search results

Summary of Contents for Sienna 2004

Reviews:

Related manuals for Sienna 2004

Brands by name

Popular brands