Toyota Sienna 2004 Owner'S Manual Download Page 245

Page: 245 / 505

04 SIENNA_U (L/O 0408)

239

2004 SIENNA from Aug. ’04 Prod. (OM45422U)

REPLACING CONTROLLER BATTERY

For replacement, use a CR2025 lithium

battery or equivalent.

CAUTION

Special  care  should  be  taken  that
small  children  do  not  swallow  the  re-
moved  battery  or  components.

NOTICE

When replacing the battery, be care-
ful not to lose the components.

Replace  only  with  the  same  or
equivalent  type  of  battery  recom-
mended  by  a  Toyota  dealer.

Dispose of used batteries according
to the local regulations.

Replace the battery by using the following

procedures:

1. Pull the case out while pushing the

lock release button to the side.

2. Remove the discharged battery.
3. Put in a new battery with the positive

(+) side up.
Put in the case securely.

NOTICE

Make sure that the positive side of
the controller battery is facing cor-
rectly.

Do not replace the battery with wet
hands. Water may cause rust.

Do  not  touch  or  move  any  compo-
nents  inside  of  the  controller,  or  it
may  interfere  with  proper  operation.

Summary of Contents for Sienna 2004


























































































































































































































































































































































































































































































































Search results

Summary of Contents for Sienna 2004

Reviews:

Related manuals for Sienna 2004

Brands by name

Popular brands

Toyota Sienna 2004, Owner'S Manual

Search results

Summary of Contents for Sienna 2004

Reviews:

Related manuals for Sienna 2004

Brands by name

Popular brands