Toyota Sienna 2004, Owner'S Manual

Page: 149 / 505

04 SIENNA_U (L/O 0408)
143
2004 SIENNA from Aug. ’04 Prod. (OM45422U)
2. Widen the clearance between the
seat cushion and seatback a little
and confirm the position of the low-
er anchorages.
3. Type A—Latch the hooks of lower
straps onto the anchorages and
tighten the lower straps.
Type B—Latch the buckles onto the
anchorages.
For owners in Canada—
The symbol on
a child restraint system indicates the pres-
ence of a lower connector system.
If your child restraint system has a top
strap, it should be anchored. (For the
installation of the top strap, see “—Using
a top strap (for third seats)” on page 137
in this Section.)
For installation details, refer to the instruc-
tion manual equipped with each product.
CAUTION
!
When using the lower anchorages
for the child restraint system, be
sure that there are no irregular ob-
jects around the anchorages or that
the seat belt is not caught.
!
Push and pull the child restraint
system in different directions to be
sure it is secure. Follow all the
installation instructions provided by
its manufacturer.
! After securing the child restraint
system, never recline the seat.
! Do not put a child restraint system
on the third seat if it interferes with
the lock mechanism of the second
seats. This can cause death or seri-
ous injury to the child and front
passenger in case of sudden brak-
ing or a collision.
To adjust the steering wheel position,
push down the lock release lever. Then
tilt the steering wheel to the desired
angle, push or pull it to the desired
steering column length and pull up the
lock release lever.
Tilt and telescopic steering
wheel