Toyota Sienna 2004, Owner'S Manual

Page: 147 / 505

04 SIENNA_U (L/O 0408)
141
2004 SIENNA from Aug. ’04 Prod. (OM45422U)
2. Turn up the covers for the lower an-
chorages. Confirm the position of
the lower anchorages near the but-
tons or tags on the seatback.
3. Type A—Latch the hooks of lower
straps onto the anchorages and
tighten the lower straps.
Type B—Latch the buckles onto the
anchorages.
For owners in Canada—
The symbol on
a child restraint system indicates the pres-
ence of a lower connector system.
If your child restraint system has a top
strap, it should be anchored. (For the
installation of the top strap, see “—Using
a top strap (for second seats)” on page
135 in this Section.)
For installation details, refer to the instruc-
tion manual equipped with each product.
CAUTION
!
When using the lower anchorages
for the child restraint system, be
sure that there are no irregular ob-
jects around the anchorages or that
the seat belt is not caught.
!
Push and pull the child restraint
system in different directions to be
sure it is secure. Follow all the
installation instructions provided by
its manufacturer.
! After securing the child restraint
system, never slide or recline the
seat.
! Do not install a child restraint sys-
tem on the second seat if it inter-
feres with the lock mechanism of
the front seats. This can cause
death or serious injury to the child
and front passenger in case of sud-
den braking or a collision.
Lower anchorages for the child restraint
systems complying with the FMVSS225
or
CMVSS210.2 specifications are
installed in the rear seat.
The anchorages are installed in the clear-
ance between the seat cushion and seat-
back of the right and center seats.
Child restraint systems complying with the
FMVSS213 or CMVSS213 specification
can be fixed to these anchorages. In this
case, it is not necessary to fix the child
restraint system with a seat belt on the
vehicle.
—Installation with child
restraint lower anchorages
(for third seats)