Toyota Sienna 2004 Owner'S Manual Download Page 91

Page: 91 / 505

04 SIENNA_U (L/O 0408)

2004 SIENNA from Aug. ’04 Prod. (OM45422U)

INSTALLING

THE

SECOND

CENTER

SEAT IN THE FRONT AND CENTER
POSITION

The second center seat can be used in
the forward position.

To use the center second seat in the for-

ward position, install according to the fol-

lowing procedure.

BEFORE

INSTALLING

THE

SECOND

CENTER SEAT IN FRONT AND CENTER
POSITION

1. Slide the front seats forward from

the rear

−

most position, stand the

seatbacks to the upright position.

2. For vehicles equipped with the front

seat side table, pull up the lock re-
lease lever and fold the table down.

Summary of Contents for Sienna 2004


























































































































































































































































































































































































































































































































Search results

Summary of Contents for Sienna 2004

Reviews:

Related manuals for Sienna 2004

Brands by name

Popular brands

Toyota Sienna 2004, Owner'S Manual

Search results

Summary of Contents for Sienna 2004

Reviews:

Related manuals for Sienna 2004

Brands by name

Popular brands