Toyota RAV 4 2019, Manual

Page: 150 / 728

150
3-4. Adjusting the steering wheel and mirrors
*
: This is a function for the optical
mirror mode, however, the setting
can also be changed while using
the digital mirror mode.
■
Enabling/disabling the
automatic anti-glare func-
tion (optical mirror mode)
The automatic anti-glare func-
tion in the optical mirror mode
can be enabled/disabled. The
setting can be changed in both
the digital mirror mode and the
optical mirror mode.

When using the digital mirror
mode

P.148

When using the optical mirror
mode
1
Press the menu/enter button.
The setting display will be dis-
played.
2
Press / of the
select buttons to select
(on) or (off), and press
the menu/enter button.
The icons will disappear.
■ Adjusting the display (digital
mirror mode)
● The icons will disappear if a button
is not operated for approximately
10 seconds or more.
● If the displayed image is adjusted,
it may appear distorted. This is not
a malfunction.
● If the brightness of the Digital
Rear-view Mirror is set too high, it
may cause eye strain. Adjust the
Digital Rear-view Mirror to an
appropriate brightness. If your
eyes become tired, change to
optical mirror mode.
● The brightness of the Digital Rear-
view Mirror will change automati-
cally according to the brightness
of the area in front of your vehicle.
■ To prevent the light sensors
from malfunctioning
To prevent the light sensors from
malfunctioning, do not touch or
cover them.
Select to zoom in/out the
displayed image.
Select to enable/disable the
PLS (point light source)
mode.
The glare from the head-
lights of vehicles behind is
reduced to help ensure an
image on the display in the
digital mirror mode.
When the PLS mode is
enabled,
will be dis-
played on the top left cor-
ner of the display.
Icons Settings