manualshive.com logo in svg

Toyota RAV 4 2019, Manual, Page: 580 / 728

Share
Download
Toyota RAV 4 2019 Manual Download Page 580

580

7-3. Do-it-yourself maintenance

5

Press 

 or 

 of the meter 

control switches, select 
“Vehicle Settings” and then 
press 

.

6

Press 

 or 

 of the meter 

control switches, select 
“TPWS” and then press 

.

7

Press 

 or 

 of the meter 

control switches, select the 
“Set Pressure”. Then press 
and hold 

.

“Setting Tire Pressure Warning 

System” will be displayed on the 

multi-information display and the 

tire pressure warning light will blink 

3 times.

When the message disappears, ini-

tialization is complete.

Vehicles with tire inflation 
pressure display function

1

Park the vehicle in a safe 
place and stop the engine for 
20 minutes or more.

Initialization cannot be performed 

while the vehicle is moving.

2

Adjust the tire inflation pres-
sure to the specified cold tire 
inflation pressure level. 
(

P.664)

Make sure to adjust the tire pres-

sure to the specified cold tire infla-

tion pressure level. The tire 

pressure warning system will oper-

ate based on this pressure level.

3

Start the engine.

4

Press 

 or 

 of the meter 

control switches on the steer-
ing wheel and select 

.

5

Press 

 or 

 of the meter 

control switches, select 
“Vehicle Settings” and then 
press 

.

6

Press 

 or 

 of the meter 

control switches, select 
“TPWS” and then press 

.

7

Press 

 or 

 of the meter 

control switches, select the 
“Set Pressure”. Then press 
and hold 

.

“Setting Tire Pressure Warning 

System” will be displayed on the 

multi-information display and the 

tire pressure warning light will blink 

3 times.
When the message disappears, ini-

tialization is complete.
A message is displayed on the 

multi-information display. Also, “--” 

is displayed for inflation pressure of 

each tire on the multi-information 

display while the tire pressure 

warning system determines the 

position.

8

Drive the vehicle at approxi-
mately 25mph (40 km/h) or 

Summary of Contents for RAV 4 2019

























































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments