Page
36/68
Rear Camera Outer Wiring
IMPORTANT:
Make sure that the wire does not come out of the corrugated tube at any instance. If there is a
possibility of wire coming out from the corrugated tube, apply tape over the corrugated tube after
pushing the wire into the tube.
(1)Temporarily install the camera using tape or similar at the location as shown on the drawing, and then route the
camera wire underneath the vehicle, (2), (3). Follow the existing vehicle harness and then cable tie it, (3), (4), (5), (6),
and (7). Route the wire near the rear left wheel and then cable tie it to the existing vehicle brackets.