Page
27/68
STEP 18. Pass the camera wire through the bracket
hole as shown and then install the rear camera using
the supplied nuts as shown.
IMPORTANT:
When fitting the camera to the bracket, torque the
nuts to 3Nm.
STEP 19. Locate the license plate bolts as shown,
remove the bolts and the nyloc nuts and then re-use
both bolts and nyloc nuts for rear camera bracket
installation.
STEP 20. Install the rear camera and tray body
bracket assembly to the trail body position hole using
the existing license plate M6 bolts and M6 nyloc
nuts.
IMPORTANT:
When fitting the tray body bracket to the tray, torque
the bolts to 7-11 Nm.
