TOYOTA
TUNDRA
2010 -
TVIP V4
Procedure
REMOTE ENGINE STARTER (RES)
Page 7 of 44 pages
Issue: E 04/07/10
1. Vehicle Disassembly. (Driver’s Side)
(a) Place the Vehicle in Park and set the
Parking Brake before disconnecting the
Battery.
ELECTRONIC TILT ADJUST ONLY:
Fully
extend the Steering Wheel’s Tilt and Telescope
positions.
(b) Remove the Negative Battery Cable.
(Fig. 1-1)
(1) Protect the Fender before starting.
(2) Note the Battery Cable position, as it will be re-
installed in the same position.
CAUTION:
Do not touch the positive terminal.
1
DS Step Cover
2
DS Cowl Cover
3
Lower Dash Cover
4
Lower Steering
Column Cover
5
PS Step Cover
6
PS Cowl Cover
7
Glove Box Under
Cover
8
PS Dash Side Cover
9
PS Airbag Trim
10
Glove Box
Remove all corresponding
connectors accordingly
during the process.
Fig. 1-2
10mm Socket
Negative
Battery
Cable
Fig. 1-1
