TOYOTA
TUNDRA
2010 -
TVIP V4
Procedure
REMOTE ENGINE STARTER (RES)
Page 26 of 44 pages
Issue: E 04/07/10
(f) Connect the V4 Harness’s 8P and 20P
Connectors to the RES ECU. (Fig. 6-5)
(g) Route the V4 Harness as shown securing it
to the Vehicle Harness with 3 Wire Ties.
(Fig. 6-6)
(h) Disconnect the Vehicle’s White 20P
Connector from the J/B located in the
Passenger’s Side Cowl Area. (Fig. 6-7)
(i) Plug in the V4 Harness’s White 20P
Connectors in between the Vehicle Harness’
20P Connector and the J/B. (Fig. 6-8)
(j) Secure the 20P Connectors to the Vehicle
Harness with 1 Wire Tie. (Fig. 6-8)
GO BACK TO THE V4 HARNESS’S
WHITE TAPE MARKER.
Fig. 6-6
Side Cutter
Fig 6-5
Fig. 6-7
Fig. 6-8
Side Cutter
Wire Tie
20P Connector
