TOYOTA
TUNDRA
2010 -
TVIP V4
Procedure
REMOTE ENGINE STARTER (RES)
Page 19 of 44 pages
Issue: E 04/07/10
(d) Remove the Bolt from the Vehicle.
(Fig. 5-3)
(e) Install the Gateway ECU with the
Connector facing outward. (Fig. 5-4)
(1) Use the Vehicle’s Bolt to secure the ECU.
(f) Attach the Vehicle Connector Block to the
Gateway ECU Bracket. (Fig. 5-4)
(1) Position the Connector in the same position as it
was removed. DO NOT rotate.
(g) Connect the V4 Harness’s 5P Connector to
the Gateway ECU.
(h) Secure the 3P Connectors and the V4
Harness to the Vehicle Harness with 1 Wire
Tie. (Fig. 5-5)
For kits w/Part Number PT398-00100 ONLY
(i) Secure the 3P Connectors to the Vehicle
Harness with 1 Wire Tie. (Fig. 5-6)
Fig. 5-4
10mm Socket
Fig. 5-3
10mm Socket
Fig. 5-5
Side Cutter
Fig. 5-6
Side Cutter
