TOYOTA
TUNDRA
2010 -
TVIP V4
Procedure
REMOTE ENGINE STARTER (RES)
Page 28 of 44 pages
Issue: E 04/07/10
USE ONLY FOR VEHICLES WITH
MANUAL STEERING TILT (steps c-h)
(c) Secure the V4 Harness to the Vehicle
Harness with 1 Wire Tie as shown.
(Fig. 7-2)
(d) Locate and disconnect the Vehicle’s White
8P Ignition Connector. (Fig. 7-2)
(e) Plug in the V4 Harness’s 8P Connectors in
between the Vehicle Harness’s 8P
Connector and the Ignition Switch
Connector. (Fig. 7-3)
(f) Use 1 Wire Tie to secure the 8P Connectors
to the Vehicle Harness. (Fig. 7-3)
(1) Verify secure connection.
(g) Use 1 Wire Tie to secure the V4 Harness to
the Vehicle Harness. (Fig. 7-3)
(h) Fold the excess V4 Harness in half and use
2 Wire Ties to secure the V4 Harness to the
Vehicle Harness. (Fig. 7-4)
Fig. 7-4
Wire Ties
(x2)
Side Cutter
Fig. 7-2
Wire Tie
V4 Fuse
Box
Vehicle 8P
Connector
Side Cutter
V4 8P Connector
Fig. 7-3
V4 8P Connector
Vehicle 8P
Connector
Side Cutter
Wire Tie(x2)
