TOYOTA
TUNDRA
2010 -
TVIP V4
Procedure
REMOTE ENGINE STARTER (RES)
Page 30 of 44 pages
Issue: E 04/07/10
(p) Use 1 Wire Tie to secure the 8P Connectors
to the Vehicle Harness. (Fig. 7-9)
(q) Use 2 Wire Ties to secure the V4 Harness
to the Vehicle Harness. (Fig. 7-9)
(r) Use 1 Wire Tie to secure the White Cable
Routing Box as shown. (Fig. 7-9)
8. Partial Reassembly.
(a) Reassemble the Vehicle, except for the
Passenger’s Cowl Cover and Step Cover.
(Fig. 8-1)
NOTE:
When reinstalling the Passenger’s Side
Knee Airbag, make sure to tighten the Bolts to
88.5 in•lbf (10 N•m).
VERIFY:
That Panels fit together properly,
with no uneven gaps.
VERIFY:
That all Connectors are reconnected.
(b) When installing the Driver’s side Knee
Airbag, install the bolts in the specified
order. (Fig. 8-2)
(1) Tighten the bolts to 88.5 in•lbf (10 N•m)
(c) Install the Short Pin. (Fig. 8-3)
Fig. 7-9
Side Cutter
Wire Tie
Wire Ties (x2)
V4 Harness
Wire Tie
Fig. 8-1
Fig. 8-3
Install Short Pin
Torque Wrench
Fig. 8-2
