P.O Box 578 Casino, NSW, 2470 Australia
Phone: International ++614 2902 9083
Australia (04) 2902 9083
Website:
http://rcs-rc.com
E mail:
TITAN-
TRACKSIDE
-6v2-AB
2.4 GHz Digital Proportional R/C
TABLE OF CONTENTS PROVIDED IN INSTRUCTIONS.
Page # 1
Introduction.
Page # 2
Preparing the TITAN-TRACKSIDE. Binding.
Page # 3
Using the TITAN-TRACKSIDE.
Page # 4
Wiring diagram.
Thank you for purchasing this 2.4 GHz DSM2 single function Trackside R/C system.
TITAN-TRACKSIDE IS FOR CONTROLLING MODEL RAILWAY LAYOUTS FROM TRACKSIDE BY R/C.
It is suitable for use with all scales. Maximum voltages allowed. Must be regulated DC.
“N” scale = 12 volts. “H0” scale use12 – 15 volts & Large scale use up to 24 volts.
Operators are required to supply and use suitable fast blow fuses on both the input and output.
“N” scale = 2 amps. “H0” scale up to 3 amps. Large scales up to 6 amps.
The base unit has a PWM motor drive output which may not be suitable for DCC equipped locos.
The # CRE-57091 PWM-Linear DC filter is available to remove the PWM element.
N.B. Removing the PWM factor may result in slightly less smooth starting & stopping for some locos.
INSTRUCTION MANUAL
THESE INSTRUCTIONS REFER SPECIFICALLY TO THE TITAN-TRACKSIDE HANDPIECE.
Only one channel is required for both speed and direction.
The CAB “A” Throttle – Direction knob has a convenient centre OFF détente position with a definite “clicky” feel.
WHEN USED FOR TRACKSIDE R/C OR BATTERY R/C
1 X 300º KNOB CONTROLS SPEED & DIRECTION.
RED BUTTON USED FOR BINDING OR SOUND TRIGGER.
REMOVE REAR OF TTC TO INSERT
THE 9 VOLT BATTERY.
LED BLINKS WHEN BATTERY LOW.
THE TITAN-TRACKSIDE IS GUARANTEED FOR ONE YEAR.
TO AVOID CONFUSION WITH OTHER OPERATORS, WE SUGGEST YOU MARK THE TX TO SHOW WHICH
TRACK CAB OR BATTERY R/C LOCO IT IS OPERATING.
CAUTION
DO NOT ATTEMPT TO ALTER THE TUNING OF THE RADIO EQUIPMENT.
DO NOT USE RADIO CONTROL EQUIPMENT IN THUNDERSTORMS.
CHILDREN UNDER 12: ADULT SUPERVISION RECOMMENDED DURING USE.
Summary of Contents for TITAN-TRACKSIDE-6v2-AB
Page 4: ......
