ENT
SET
SET
2
3
4
1
2
3
2
SET indicator
Setting Up the Remote
Commander
About Presetting the Commander
The Commander is preset at the factory to operate
Sony brand components.
If you’re using the Commander with a Sony
component, you won’t need to preset the
Commander before you start using it.
To set up the Commander to use with other (non-
Sony) manufacturers’ components, or to use with a
component that is not preset at the factory, you’ll
need to follow the instructions in this manual to
preset the Commander with the correct code
number for your components. (See the supplied
“Component code numbers” also).
Notes
•The Commander can be set up to operate only
one component per button – unless their code
numbers happen to be the same. For example,
you cannot set up the Commander to operate a
Sony TV and a Panasonic TV simultaneously
(because they use different code numbers).
•You may not be able to operate even a Sony
brand component with the factory presetting. In
such a case, follow the procedure in “Setting the
Code.”
Installing the Batteries
Before replacing the batteries, have new ones
ready beforehand.
Push open the battery compartment and insert two
R6 (size AA) batteries*.
Be sure to line up the + and – on the batteries with
the + and – on the battery compartment.
1
2
* The supplied manganese batteries are for testing
purposes.
When to replace the batteries
Under normal conditions, batteries will last up to
one year. If the Commander does not operate
properly, the batteries might be worn out. Replace
the batteries with new ones.
Notes
•Replace both batteries with new ones.
•Do not take more than 3 minutes to replace the
batteries; otherwise, your setting of the code
numbers will be erased.
Notes on Batteries
•Do not mix old batteries with new ones or mix
different types of batteries together.
•If the electrolyte inside the battery should leak,
wipe the contaminated area of the battery
compartment with a cloth and replace the old
batteries with new ones. To prevent the
electrolyte from leaking, remove the batteries
when you plan not to use the Commander for a
long period of time.
About tactile dots
The number
5
button and
P
each have a tactile dot
for convenient use.
Component that can be preset
TV
Factory setting
Sony TV
English
3-284-979-
11
(1)
Operating Instructions
Mode d’emploi (au verso)
© 2007 Sony Corporation Printed in China
RM-EZ4T
Remote
Commander
Setting the Code
Follow the steps 1 and 2 below for each component
you plan to use with the Commander.
Step 1: Entering the Code Number
1
See the supplied
“Component code
numbers”, and find the
four-digit code number
for the desired
component.
If more than one code
number is listed, use
the number that’s listed
first.
For example, if you’re
setting up a Sony TV,
you would use the
code number 8201.
If your component isn’t
listed, see “Searching
for the Correct Code.”
2
Press
SET
more
than two seconds.
The SET indicator
lights up.
3
Press the Number buttons to enter the
four-digit component code number.
4
Press
ENT
. The SET indicator turns
off. If the SET indicator flashes five
times before lighting up, it means
that the setup is incomplete.
Confirm the component code
number and start over from Step 3.
If the code setting is not finished
properly
If you do not input anything into the Commander
within 20 seconds between each step, or if you
press
SET
while setting the component code, the
setup procedure will be cancelled.
Start over from Step 2.
Step 2: Checking if the Code Number
Works
1
Power on the component you want to set
up.
2
Aim the Remote Commander at the
component and press a button to check if
that button works.
For example, press the
1
button to see if it
works on your component .
3
Check that the other buttons of the
Commander are operating the
corresponding functions of the
component.
You can write down the code number on the
label inside the battery compartment lid.
If the Commander Doesn’t Seem to Be
Working...
•First, try repeating these setup procedures using
the other codes listed for your component (see
the supplied “Component code numbers”).
•If – after trying all the codes listed for your
component – you still cannot get the Commander
to work properly, try the search method
described in “Searching for the Correct Code.”
Notice for the customer in the
countries applying EU Directives
The manufacturer of this product is Sony
Corporation, 1-7-1 Konan, Minato-ku, Tokyo,
Japan. The Authorized Representative for EMC
and product safety is Sony Deutschland GmbH,
Hedelfinger Strasse 61, 70327 Stuttgart, Germany.
For any service or guarantee matters please refer to
the addresses given in separate service or guarantee
documents.
Disposal of Old Electrical &
Electronic Equipment (Applicable
in the European Union and other
European countries with separate
collection systems)
This symbol on the product or on its packaging
indicates that this product shall not be treated as
household waste. Instead it shall be handed over to
the applicable collection point for the recycling of
electrical and electronic equipment. By ensuring
this product is disposed of correctly, you will help
prevent potential negative consequences for the
environment and human health, which could
otherwise be caused by inappropriate waste
handling of this product. The recycling of materials
will help to conserve natural resources. For more
detailed information about recycling of this
product, please contact your local Civic Office, your
household waste disposal service or the shop where
you purchased the product.
Searching for the Correct Code
You can find a code number
available for a component that
doesn’t have one in the
supplied “Component code
numbers.”
Before starting the Search
function
Set the component to the
following status so that the
Search function works
effectively.
TV: Power-on
* If any of these components are assigned to any of the
Component Select buttons, you can set a component code
using the Search function.
1
Press
SET
more than two seconds. The SET
indicator lights up.
2
Press
P
or
PROGRAM –
and
1
in turn until the component reacts as
follows:
TV: Powers off
Press
P
to go to the next code
number.
Press
PROGRAM –
to go back to the
previous code number.
The SET indicator flashes once after the
numbers have turned one cycle.
One cycle means, for example, that the
commander finishes searching all the
component code numbers allocated to the
component.
3
Press
ENT
.
The SET indicator and the Component
button turn off.
If the SET indicator flashes five times
before turning off, it means that the setup
is incomplete. Start over from Step 2.
If the component does not operate properly, repeat
steps 1 to 3 and search for another code.
If you still cannot get the Commander to work
properly, see “Troubleshooting.”
Operating a Component
1
Point the Commander directly at the
component.
2
Press the button for the function you want
to use.
See “Remote Button Descriptions” for complete
descriptions of the buttons on the Commander.
Notes on Using the Remote Commander
Basically, use this Commander in the same way as
the Commanders supplied with your components.
•Using this Commander will not increase the
functions of your components. The functions of
the Commander are limited to the functions of
the components themselves. For example, if your
TV does not have a MUTING function,
%
on this
Commander will not function with your TV.
•Some functions of the component may not work
with this Commander.
Remote Button Descriptions
Operating a TV
1
To set up the Commander, press
SET
more than two
seconds.
2
To change the input mode.
3
To change the programme.
4
To select double-digit numbers.
5
To select DIGITAL.
6
2
+
: Volume up
2
–
: Volume down
7
To mute the volume on a TV.
8
To switch to Teletext.
9
To return from Teletext to TV.
0
Fastext buttons.
qa
To turn on and off the power of the selected
component.
qs
P
: Programme up.
PROGRAM –
: Programme down.
qd
To select a number between 20 and 29.
qf
To operate JUMP, FLASHBACK or CHANNEL
RETURN function on the TV.
Specifications
Operable distance
Approx. 7 m (varies depending of the
component of each manufacturer)
Power requirements
Two R6 (size AA) batteries
Battery life
Approx. 1 year (varies depending on
frequency of button use - up to
approx. 300 times per day.)
Dimensions
Approx. 63
×
149
×
30 mm (w/h/d)
Mass
Approx.123 g (including batteries)
Supplied accessories
Operating Instructions (1)
R6 (size AA) batteries (2)*
* The supplied manganese batteries are for testing purposes.
Design and specifications are subject to change without notice.
The validity of the CE marking is restricted to only
those countries where it is legally enforced, mainly
in the countries EEA (European Economic Area).
Troubleshooting
If you have problems setting up or using the Commander:
• When setting up the Commander, carefully go through the
procedures described in “Setting the Code.” If the code
that’s listed first for your component doesn’t work, try all
the codes for your component - in the order in which they’re
listed. If all the codes fail to work (or if your component is
not listed in this manual), try using the procedures in
“Searching for the Correct Code.”
• Check that you’re aiming the Commander directly at the
component, and that there are no obstructions between the
Commander and the component.
• Make sure the batteries you’re using are not worn out, and
that they’re inserted correctly.
• Check that the component has infrared remote capability.
For example, if your component didn’t come with a remote
commander, it probably isn’t capable of being controlled by
a remote commander.
• Should any problem persist, reset the Commander to the
factory setting by pressing the
1
,
t
and
2
–
buttons
simultaneously.
Customer Service
If you have any questions or
problems concerning the
Remote Commander that are
not covered in this manual,
please call the customer remote
helpline. The number is
mentioned in the warranty
card.
Helpline available
Disposal of waste batteries
(applicable in the European
Union and other European
countries with separate
collection systems)
This symbol on the battery or on the packaging
indicates that the battery provided with this
product shall not be treated as household waste.
By ensuring these batteries are disposed of
correctly, you will help prevent potentially
negative consequences for the environment and
human health which could otherwise be caused by
inappropriate waste handling of the battery. The
recycling of the materials will help to conserve
natural resources.
In case of products that for safety, performance or
data integrity reasons require a permanent
connection with an incorporated battery, this
battery should be replaced by qualified service
staff only.
To ensure that the battery will be treated properly,
hand over the product at end-of-life to the
applicable collection point for the recycling of
electrical and electronic equipment.
For all other batteries, please view the section on
how to remove the battery from the product safely.
Hand the battery over to the applicable collection
point for the recycling of waste batteries.
For more detailed information about recycling of
this product or battery, please contact your local
Civic Office, your household waste disposal
service or the shop where you purchased the
product.
Code No.
c
ENT
c
SET
Component code numbers
English
The following tables show brand names and their
corresponding code numbers.
To set a Component Code (see the Operating Instructions for
details)
TV
Brand
Sony
Aiwa
Akai
Alba
B&O
(Bang & Olufsen)
Beko
Bestar
Blaupunkt
Blue sky
Brandt
Brionvega
Bush
Clatronic
Continental
Crown
Daewoo
Deccacolour
Dual
Emerson
Ferguson
First line
Fisher
Fraba
GoldStar/LG
Goodmans
Grundig
Hansol
Hitachi
Hyper
ICE
Inno-Hit
Irradio
JVC
Kendo
Kiton
Lenco
Loewe
Mark
Matsui
Medion
Mitsubishi
Nokia
Nokia/ITT
Nokia Oceanic
Nordmende
Onwa
Orion
Code No.
8201, 8202, 8203, 8204, 8205, 8206,
8207, 8208, 8209. 8210
8051, 8127
8061, 8020, 8056, 8062
8062
8083
8025
8013
8026
8013
8037
8048
8117, 8075, 8062, 8010, 8115
8013, 8014
8076
8024, 8033
8013, 8119
8012, 8084, 8085
8013
8086
8038, 8042, 8037
8013, 8056
8056
8013
8097, 8100, 8018, 8013, 8113
8020, 8062, 8037, 8013, 8014, 8015,
8075, 8116
8090, 8026, 8027
8123
8089, 8092, 8093, 8052, 8053, 8010,
8015, 8104
8025
8062
8010
8062
8077, 8062
8013
8010
8105
8101, 8018, 8106
8013
8090, 8064, 8056, 8033, 8076, 8026
8013
8071, 8072, 8069, 8070
8020, 8021, 8036, 8035, 8034
8034, 8035
8036, 8035
8044, 8039, 8040
8062
8051, 8015
Brand
Code No.
8095, 8079, 8109, 8110
8086, 8087, 8088, 8089, 8094, 8097,
8100, 8101, 8013, 8014, 8015, 8019
8013, 8015
8059
8013
8013
8013
8015
8125, 8114
8099, 8032, 8037, 8023, 8039, 8040,
8044, 8042
8020
8089, 8096, 8084, 8085, 8018, 8012,
8118, 8124, 8094
8056, 8107
8094, 8013, 8062, 8105, 8112
8086,8105
8031
8082
8026, 8027
8013
8013
8031
8013
8010
8013
8099, 8032, 8037, 8040, 8039, 8043,
8023
8099, 8037, 8032, 8042, 8044
8058, 8057, 8102, 8114
8126
8013, 8020
8013
8122
8013, 8014
8013
Panasonic
Philips
Phonola
Pioneer
Provision
PYE
Radio
Radiola
Roadstar
SABA
Salora
Samsung
Sanyo
Schneider
SEG
Seleco
Sharp
Siemens
Supertech
Supervision
Tandberg
Tatung
Teac
Techimagen
Telefunken
Thomson
Toshiba
UNITED
Universum
Vestel
VIETA
Watson
W.W.House
