Toyota Land Cruiser 2007 Manual Download Page 59

Page: 59 / 308

I13262c

2. Make sure the shoulder belt passes

through the hanger when folding the
third seat.

This prevents the shoulder belt from being
damaged.

CAUTION

The seat belt must be removed from
the hanger when the seat belt is in
use.

TUMBLING THIRD SEAT

1. Lower the head restraint to the low-

est position. Unlock the seatback
and fold it down.

Tumbling the third seats will enlarge the
luggage compartment. See “Cargo and
luggage” on page 257 for precautions
when loading luggage.

2. Unlock the seat cushion and slide

the whole seat to the rear−most
position while pulling up the handle.

Summary of Contents for Land Cruiser 2007





















































































































































































































































































































Search results

Summary of Contents for Land Cruiser 2007

Reviews:

Related manuals for Land Cruiser 2007

Brands by name

Popular brands

Toyota Land Cruiser 2007, Manual

Search results

Summary of Contents for Land Cruiser 2007

Reviews:

Related manuals for Land Cruiser 2007

Brands by name

Popular brands