Toyota Corolla 2004 Owner'S Manual Download Page 125

Page: 125 / 272

’04 Corolla_U (L/O 0306)

125

2004 COROLLA from Oct. ’03 Prod. (OM12859U)

Fan speed selector

Turn the knob to adjust the fan speed—to

the right to increase, to the left to de-
crease.

Temperature selector

Turn the knob to adjust the temperature—

to the right to warm, to the left to cool.

Air flow selector

Turn the knob to select the vents used for
air flow.

1. Panel—

Air flows mainly from the

instrument panel vents.

2. Bi

−

level—

Air flows from both the floor

vents and the instrument panel vents.

3. Floor—

Air flows mainly from the floor

vents.

4. Floor/Windshield—

Air flows mainly

from the floor vents and windshield

vents.
Turning the air flow selector to the

floor/windshield position turns on the

defogging function with the purpose of
clearing the front view.
In this position, air intake selector
mode changes to FRESH automatically

to clean up the front view quickly. It is

not possible to return to RECIRCULATE
in this position.
Press the “A/C” button for dehumidified

heating or cooling. This setting clears
the front view more quickly.

5. Windshield—

Air flows mainly from the

windshield vents.
Turning the air flow selector to the
windshield position turns on the defog-

ging function with the purpose of clear-

ing the front view.

Summary of Contents for Corolla 2004

















































































































































































































































































Search results

Summary of Contents for Corolla 2004

Reviews:

Related manuals for Corolla 2004

Brands by name

Popular brands

Toyota Corolla 2004, Owner'S Manual

Search results

Summary of Contents for Corolla 2004

Reviews:

Related manuals for Corolla 2004

Brands by name

Popular brands