Toyota Corolla 2004 Owner'S Manual Download Page 195

Page: 195 / 272

’04 Corolla_U (L/O 0306)

195

2004 COROLLA from Oct. ’03 Prod. (OM12859U)

11. Check the air pressure of the re-

placed tire.

Adjust the air pressure to the specifi-

cation designed on page 255 in Sec-

tion 8. If the pressure is lower, drive

slowly to the nearest service station

and fill to the correct pressure.
Do not forget to reinstall the tire infla-

tion valve cap as dirt and moisture

could get into the valve core and

possibly cause air leakage. If the cap

is missing, have a new one put on as

soon as possible.

12.Restow all the tools, jack and

flat tire securely.

As soon after changing wheels as

possible, tighten the wheel nuts to the

torque specified on page 255 in Sec-

tion 8 with a torque wrench. Have a

technician repair the flat tire and re-

place the spare tire with it.

CAUTION

Before driving, make sure all the

tools, jack and flat tire are se-

curely in place in their storage

location to reduce the possibility

of personal injury during a colli-

sion or sudden braking.

If your vehicle becomes stuck in snow,

mud, sand, etc., then you may attempt

to rock the vehicle free by moving it
forward and backward.

CAUTION

Do not attempt to rock the vehicle
free by moving it forward and back-

ward if people or objects are any-

where near the vehicle. During the
rocking operation the vehicle may

suddenly move forward or backward

as it becomes unstuck, causing injury
or damage to nearby people or ob-

jects.

—After changing wheels

If your vehicle becomes stuck

Summary of Contents for Corolla 2004

















































































































































































































































































Search results

Summary of Contents for Corolla 2004

Reviews:

Related manuals for Corolla 2004

Brands by name

Popular brands

Toyota Corolla 2004, Owner'S Manual

Search results

Summary of Contents for Corolla 2004

Reviews:

Related manuals for Corolla 2004

Brands by name

Popular brands