Toyota Corolla 2004 Owner'S Manual Download Page 126

Page: 126 / 272

’04 Corolla_U (L/O 0306)

126

2004 COROLLA from Oct. ’03 Prod. (OM12859U)

In this position, air intake selector

mode changes to FRESH automatically

to clean up the front view quickly. It is
not possible to return to RECIRCULATE

in this position.
Press the “A/C” button for dehumidified
heating or cooling. This setting clears

the front view more quickly.

For details about air flow selector settings,

see “Air flow selector settings” described

below.

Air intake selector

Press the button to select the air source.

1. Recirculate

(indicator light is on)—Re-

circulates the air inside the vehicle.

2. Fresh

(indicator light is off)—Draws

outside air into the system.

To prevent fogging up of the windshield,

the air intake mode may change automati-

cally to FRESH depending on the condi-
tion of the air conditioning system.

“A/C” button

To turn on the air conditioning, press the

“A/C” button. The “A/C” button indicator
will come on. To turn the air conditioning

off, press the button again.
If the “A/C” button indicator flashes, there

is a problem in the air conditioning system

and the air conditioning automatically
shuts off. If this happens, take your ve-

hicle to a Toyota dealer for service.

Summary of Contents for Corolla 2004

















































































































































































































































































Search results

Summary of Contents for Corolla 2004

Reviews:

Related manuals for Corolla 2004

Brands by name

Popular brands

Toyota Corolla 2004, Owner'S Manual

Search results

Summary of Contents for Corolla 2004

Reviews:

Related manuals for Corolla 2004

Brands by name

Popular brands