Toyota Corolla 2004 Owner'S Manual Download Page 168

Page: 168 / 272

’04 Corolla_U (L/O 0306)

168

2004 COROLLA from Oct. ’03 Prod. (OM12859U)

Determine what kind of tires your

vehicle is originally equipped with.

1. Summer tires

Summer tires are high

−

speed capabil-

ity tires best suited to highway driving

under dry conditions.
Since summer tires do not have the

same traction performance as snow

tires, summer tires are inadequate for

driving on snow

−

covered or icy roads.

For driving on snow

−

covered or icy

roads, we recommend using snow

tires. If installing snow tires, be sure

to replace all four tires.

2. All season tires

All season tires are designed to pro-

vide better traction in snow and to be

adequate for driving in most winter

conditions, as well as for use all year

round.

All season tires, however, do not have

adequate traction performance

compared with snow tires in heavy or

loose snow. Also, all season tires fall

short in acceleration and handling

performance compared with summer

tires in highway driving.
The details about how to distinguish

summer tires from all season tires are

described on page 157.

CAUTION

Do not mix summer and all sea-

son tires on your vehicle as

this can cause dangerous han-

dling characteristics, resulting

in loss of control.

Do not use tires other than the

manufacturer’s designated

tires, and never mix tires or

wheels of the sizes different

from the originally equipped

tires and wheels.

Types of tires

Summary of Contents for Corolla 2004

















































































































































































































































































Search results

Summary of Contents for Corolla 2004

Reviews:

Related manuals for Corolla 2004

Brands by name

Popular brands

Toyota Corolla 2004, Owner'S Manual

Search results

Summary of Contents for Corolla 2004

Reviews:

Related manuals for Corolla 2004

Brands by name

Popular brands