Toyota Corolla 2004 Owner'S Manual Download Page 71

Page: 71 / 272

’04 Corolla_U (L/O 0306)

2004 COROLLA from Oct. ’03 Prod. (OM12859U)

CAUTION

Do not adjust the mirror while the
vehicle is moving. Doing so may

cause the driver to mishandle the ve-

hicle and an accident may occur re-
sulting in death or serious injuries.

NOTICE

The outside rear view mirrors are
fixed in place. Do not try to fold the

mirrors. It may damage the mirrors.

To adjust a mirror, use the switches.

1. Master switch—To select the mirror to

be adjusted

Push the switch to “L” (left) or “R”
(right).

2. Control switch—To move the mirror

Push the switch in the desired direc-
tion.

Mirrors can be adjusted when the key is
in the “ACC” or “ON” position.

NOTICE

If ice should jam the mirror, do not
operate the control or scrape the mir-

ror face. Use a spray de

−

icer to free

the mirror.

—Power rear view mirror

control

Summary of Contents for Corolla 2004

















































































































































































































































































Search results

Summary of Contents for Corolla 2004

Reviews:

Related manuals for Corolla 2004

Brands by name

Popular brands

Toyota Corolla 2004, Owner'S Manual

Search results

Summary of Contents for Corolla 2004

Reviews:

Related manuals for Corolla 2004

Brands by name

Popular brands