Toyota Corolla 2004 Owner'S Manual Download Page 18

Page: 18 / 272

’04 Corolla_U (L/O 0306)

2004 COROLLA from Oct. ’03 Prod. (OM12859U)

CAUTION

To avoid serious personal injury, you
must do the following.

Before you close the power win-

dows, always make sure there is
nobody around the power windows.

You must also make sure the

heads, hands and other parts of the
bodies of all occupants are kept

completely inside the vehicle. If

someone’s neck, head or hands get
caught in a closing window, it

could result in a serious injury.

When anyone closes the power win-
dows, make sure he or she oper-

ates the windows safely.

When small children are in the ve-

hicle, never let them use the power

window switches without supervi-
sion. Use the window lock switch to

prevent them from making unex-

pected use of the switches.

Be sure to remove the ignition key

when you leave your vehicle.

Never leave anyone (particularly a
small child) alone in your vehicle,

especially with the ignition key still

inserted. Otherwise, he/she could
use the power window switches and

get trapped in a window. Unat-

tended person (particularly a small
child) can be involved in a serious

accident.

Summary of Contents for Corolla 2004

















































































































































































































































































Search results

Summary of Contents for Corolla 2004

Reviews:

Related manuals for Corolla 2004

Brands by name

Popular brands

Toyota Corolla 2004, Owner'S Manual

Search results

Summary of Contents for Corolla 2004

Reviews:

Related manuals for Corolla 2004

Brands by name

Popular brands