Toyota Corolla 2004 Owner'S Manual Download Page 148

Page: 148 / 272

’04 Corolla_U (L/O 0306)

148

2004 COROLLA from Oct. ’03 Prod. (OM12859U)

The fuel pump shut off system stops sup-

plying fuel to the engine to minimize the

risk of fuel leakage when the engine stalls
or an airbag inflates upon collision. To

restart the engine after the fuel pump shut

off system activates, turn the ignition
switch to “ACC” or “LOCK” once and start

it.

CAUTION

Inspect the ground under the vehicle
before restarting the engine. If you

find that liquid has leaked onto the

ground, it is the fuel system has
been damaged and it is in need of

repair. In this case, do not restart the

engine.

If you plan to drive your Toyota in

another country...
First,

comply with the vehicle registration

laws.

Second,

confirm the availability of the cor-

rect fuel (unleaded and minimum octane

number).

The three

−

way catalytic converter is an

emission control device installed in the
exhaust system.

The purpose is to reduce pollutants in the
exhaust gas.

CAUTION

Keep people and combustible mate-
rials away from the exhaust pipe

while the engine is running. The

exhaust gas is very hot.

Do not drive, idle or park your ve-

hicle over anything that might burn

easily such as grass, leaves, paper
or rags.

Fuel pump shut off system

Operation in foreign countries

Three

−

way catalytic converters

Summary of Contents for Corolla 2004

















































































































































































































































































Search results

Summary of Contents for Corolla 2004

Reviews:

Related manuals for Corolla 2004

Brands by name

Popular brands

Toyota Corolla 2004, Owner'S Manual

Search results

Summary of Contents for Corolla 2004

Reviews:

Related manuals for Corolla 2004

Brands by name

Popular brands