Toyota 2008 Camry Owner'S Manual Download Page 476

Page: 476 / 564

476

8-2. Steps to take in an emergency

CAMRY_HV_U (OM33A87U)

Turn the tire jack portion “A” by
hand until the notch of the jack
is in contact with the jack point.

The jack point guides are located
under the rocker panel. They
indicate the jack point positions.

Raise the vehicle until the tire is
slightly raised off the ground.

Remove all the wheel nuts and
the tire.

When resting the tire on the
ground, place the tire so that the
wheel design faces up to avoid
scratching the wheel surface.

Summary of Contents for 2008 Camry





















































































































































































































































































































































































































































































































































































Search results

Summary of Contents for 2008 Camry

Reviews:

Related manuals for 2008 Camry

Brands by name

Popular brands

Toyota 2008 Camry, Owner'S Manual

Search results

Summary of Contents for 2008 Camry

Reviews:

Related manuals for 2008 Camry

Brands by name

Popular brands