Toyota 2008 Camry Owner'S Manual Download Page 291

Page: 291 / 564

291

5-7. Connecting Bluetooth

sys

CAMRY_HV_U (OM33A87U)

Press the “SETUP” button.

Select “Bluetooth*”.

Select the device to be con-
nected.

Supported profile icons will be dis-
played.

Phone

Audio player

Supported profile icons for cur-
rently connected devices will illumi-
nate.

Dimmed icons can be selected to connect to the function directly.

: Bluetooth is a registered trademark of Bluetooth SIG, Inc.

To turn auto connection mode on, set “Bluetooth* Power” to on.
(



P. 294)

When you register a phone, auto connection will be activated. Always
set it to this mode and leave the Bluetooth

phone in a place where a

connection can be established.

When the power switch is turned to ACCESSORY or ON mode, the sys-
tem will search for a nearby cellular phone you have registered.

Next, the system automatically connects with the most recent of the
phones connected to in the past. Then, the connection result is displayed.

Connecting a Bluetooth

device

Up to 5 Bluetooth

devices (Phones [HFP] and audio players

[AVP]) can be registered.

If more than 1 Bluetooth

device has been registered, select

which device to connect to.

1
2
3

1
2

Auto connection

Summary of Contents for 2008 Camry





















































































































































































































































































































































































































































































































































































Search results

Summary of Contents for 2008 Camry

Reviews:

Related manuals for 2008 Camry

Brands by name

Popular brands

Toyota 2008 Camry, Owner'S Manual

Search results

Summary of Contents for 2008 Camry

Reviews:

Related manuals for 2008 Camry

Brands by name

Popular brands